EMT Practice Test

1. Question Content...

---

Question1: Scenario: A Citrix Engineer is managing an existing XenDesktop and Workspace Environment Management (WEM) infrastructure. The engineer performed recent benchmarks on all the user applications. As a result of this investigation, the engineer determined that some applications are consuming excess memory even when they are idle and NOT actively being utilized by users. This results in performance degradation of active applications.
Which step can the engineer take to help improve the performance degradation of active applications?

Question2: Scenario: A Citrix Engineer is designing a Provisioning Services environment based on the following environmental factors:
-A large number of target devices are spread over multiple subnets.
-The subnets include non-Provisioning Services machines that rely on starting up over the network
-A security mandate prohibits the use of TFTP.
-Provisioning Services 7.6 Update 1 is being used to maintain LTSR compliance.
Which Provisioning Services boot method is appropriate for the target devices?

Question3: When should a Citrix Engineer utilize the Processes WhiteList feature of Workspace Environment Management (WEM)?

Question4: Users complain that it is taking longer to access applications now than it did last week.
What is the best way to determine what changed from last week to this week?

Question5: Call center users accessing a XenApp hosted desktop by means of thin client devices are unable to see a new multi-function printer in their session.
What can the administrator do to resolve this?

Question6: When creating layers, an image template can be used to _________. (Choose the correct option to complete the sentence.)

Question7: Which three components can a Citrix audit within Provisioning Services? (Choose three.)

Question8: Which Provisioning Services infrastructure component is used as the storage location for the vDisks?

Question9: What happens when no free RAM is available with the 'Cache in device RAM with overflow on hard disk' write cache option?

Question10: Scenario: A Citrix Engineer is managing a XenApp and XenDesktop environment that has been built with the following site architecture:
-Site A was created in datacenter
-Site B was created in datacenter
-A NetScaler Gateway is set up in each datacenter. Each Gateway has access to both Sites.
-The StoreFront server group in each Site is configured to enumerate resources from both Sites.
-Application A is available in Site A only.
-Optimal Gateway Routing has NOT been configured.
A user located near datacenter B logs in through NetScaler and attempts to launch Application A.
Which behavior is expected in this scenario?

Question11: Scenario: A Citrix XenApp Administrator notices that one Citrix XenApp server is hanging during the weekly restart phase. The IMA Service appears to hang during startup.
Which two options could explain the cause of the issue? (Choose two.)

Question12: What should a Citrix Engineer do to ensure that HDX sessions connect using UDP with failback to TCP?

Question13: Scenario: When configuring a Web Interface site, an administrator configures port 8000 for Citrix XML Service communications. During internal testing, the administrator sees that application enumeration does NOT occur.
Where else does the administrator need to configure the Citrix XML Service port?

Question14: Scenario: A XenApp Administrator implemented the pre-launch feature for a corporate email application.
As the administrator monitors users' sessions in the AppCenter, the administrator notices that no pre- launch sessions are being created. Application launch time continues to remain high.
What are two reasons why pre-launch sessions are NOT being created? (Choose two.)

Question15: Users accessing a XenApp hosted desktop by means of thin client devices can see a new network printer that has been provisioned by the administrator using the session printers policy but are unable to print to this printer.
What can the administrator do to resolve this?

Question16: Scenario: An administrator has enabled a Citrix policy called HDX Policy that enables extra compression for moving and still images for user connections greater than 400 Kbps.
Branch Repeater VPX is then deployed to all remote offices; however, users report NO appreciable benefits.
Which change should be made to HDX Policy?

Question17: Scenario: A Citrix Engineer is designing a Provisioning Services environment based on the following environmental factors:
-A large number of target devices are spread over multiple subnets.
-The subnets include non-Provisioning Services machines that rely on booting over the network
-A security mandate prohibits the use of TFTP.
-The XenDesktop Setup Wizard is used to create the target devices.
Which Provisioning Services boot method is appropriate for the target devices?

Question18: Scenario: A Citrix Engineer found that a high number of Desktop OS machines are reported as
'Unregistered'. The engineer successfully logs in to one of the affected Desktop OS machines as a domain user and finds that all of the affected Desktop OS machines are on the same hosting infrastructure.
Several Desktop OS machines on the same hosting infrastructure registered successfully. However, the users in the environment have NOT reported any issues.
What is causing the Desktop OS machines to be reported as 'Unregistered'?

Question19: A Citrix Engineer needs to create a Workspace Environment Management (WEM) Delegated Administrator account for a new member of the IT team who needs access to manage System Optimizations such as CPU, RAM, Process Management settings and view the entire console.
Which type of Delegated Administrator should the engineer create for the new member?

Question20: Scenario: A Citrix XenApp Administrator plans to integrate a new application. This application is profiled to be streamed to a group of users and will be published to be streamed to the client.
Some users are able to launch the streamed application but a few of them are NOT able to do so.
What could cause this issue?

Question21: Which three provisioning Services components can be located on the Provisioning Services server?
(Choose three.)

Question22: Scenario: A Citrix user is connecting to a Virtual Delivery Agent (VDA) in an environment where Flash redirection is enabled for the entire Site with the default settings. However, the HDX protocol is NOT able to determine network security.
What will occur when the user attempts to access Flash content within the user session for the first time?

Question23: What occurs after a Provisioning Services target device downloads or otherwise accesses the bootstrap file?

Question24: Scenario: A Citrix Engineer has configured a Provisioning Services environment where all target devices are using the cache on device hard drive method and have a persistent disk attached to them. The engineer enabled Citrix Profile Management for all users and installed new applications while the target device was started in Standard mode.
The new data will be stored __________ and ___________. (Choose the correct option to complete the sentence).

Question25: Scenario: A Citrix Engineer is deploying a Workspace Environment Management (WEM) in their existing company infrastructure. As part of the deployment, the Agent Host is being deployed and configured on the required virtual machines (VMs). The engineer will use the Agent Host .adm and .admx templates to apply the settings.
Which three Agent Host settings can the engineer set using the administrative templates? (Choose three.)

Question26: Scenario: A Citrix Engineer needs to implement Workspace Environment Management (WEM) into an existing XenDesktop infrastructure. The current infrastructure utilizes a large number of Active Directory (AD) object configurations to manage user and group settings.
The engineer first needs to review the current AD infrastructure for any identical configurations and settings that may cause conflicts with WEM.
Which two specific pre-existing objects should the engineer review? (Choose two.)

Question27: Scenario: A Citrix Engineer recently implemented Workspace Environment Management (WEM) in an existing XenDesktop infrastructure to include deployment of Agent Host on several Virtual Delivery Agent (VDA) machines. After beginning to configure various global settings for users, the engineer realized that all Agent Hosts should NOT share all the same settings, since each set of users requires different settings and policies for their sessions.
Which option should the engineer configure to provide different settings and policies for user sessions?

Question28: The StoreFront subscription store is located on ______. (Choose the correct option to complete the sentence.)

Question29: Scenario: A Citrix Engineer needs to complete the installation and setup of a new Citrix Workspace Environment Management (WEM) infrastructure.
As one of the final steps, the engineer needs to point the Administration Console to the existing Citrix Licensing Server.
Which step should the engineer take to complete this task

Question30: Scenario:
A Citrix Engineer is managing a XenApp and XenDesktop environment that has been built with the following site architecture:
-The environment consists of one Site with three zones.
-The Primary Zone is located in datacenter.
-Satellite Zone 1 is located in datacenter.
-Satellite Zone 2 is located in datacenter C.
-Gateway A is in datacenter.
- Gateway B is in datacenter.
-A NetScaler Gateway has been set up in datacenter A and datacenter Each Gateway has access to all zones.
-The StoreFront server group is located in the Primary Zone and enumerates all resources within the Site.
-Delivery Controllers are configured in all three zones.
-Application B is available in Satellite Zone 1 only.
-Optimal Gateway Routing has been configured so that Gateway A is preferred for the Primary Zone and Satellite Zone 2; Gateway B is preferred for Satellite Zone 1.
A user located near datacenter A logs in through NetScaler Gateway and attempts to launch Application B.
Which behavior is expected in this scenario?

Question31: Scenario: A Citrix XenApp Administrator configured the audio quality to low in a Citrix Group Policy Object and applied it to all the XenApp servers in the farm. A few weeks later, another administrator from the team created an OU Group Policy Object and set the audio quality to high.
The administrator applied the policy object to the OU that contains all the XenApp servers in the farm.
What would be the audio quality for all the XenApp servers using precedence for the resultant policy?

Question32: Which Provisioning Services component can communicate directly with the Farm database?

Question33: Scenario: An administrator wishes to add disaster recovery capability to an existing XenApp environment.
The administrator built some new servers into a disaster recovery datacenter that has a 1 GB link to the production datacenter.
How should the administrator configure the new servers for users?

Question34: Scenario: A Citrix Engineer is managing a Provisioning Services Farm with the following specifications:
- A single Farm with one Site, with two Provisioning Services servers deployed with 8 vCPU each, which are supporting a total of 500 target devices in production.
-The ports and threads have been configured so that each server can stream concurrently to 250 devices each.
-Due to an upcoming merger, 250 more target devices must be supported by the existing Provisioning Services farm.
-The Provisioning Services servers must handle the extra capacity while aligning to Citrix leading practices for resiliency.
Which step should the engineer perform to accomplish these requirements?

Question35: Scenario: A Citrix Engineer installed and configured two Provisioning Services servers to guarantee high availability. One of the Provisioning Services servers experienced failure and now the write cache is no longer available for the target devices.
Which write cache location is currently being used in this environment?

Question36: What is the recommended configuration for deployment different versions of Microsoft Office?

Question37: A Citrix Engineer has enabled Local Host Cache in a XenDesktop Site to manage outage situations.
Which three resources are supported by the Local Host Cache at the time of a database outage? (Choose three.)

Question38: A Citrix Engineer needs to implement Workspace Environment Management (WEM) in an existing XenDesktop environment.
Which three software requirements should the engineer consider before implementing WEM? (Choose three.)

Question39: Exhibit.


Scenario: A Citrix Engineer recently implemented XenDesktop in an environment. The environment has a provisioned Windows 10 virtual desktop layered with the help of Enterprise Layer Manager (ELM) and provisioned through Machine Creation Services (MCS).
Which set of files will be presented to the operating system through the composite file system merging process according to the diagram?

Question40: Which two components should a Citrix Engineer include in an operating system layer from a gold image?
(Choose two.)

Question41: How can a Citrix Engineer update applications in an AppLayering environment?

Question42: What is the default auto-launch behavior for published applications and desktops within a XenApp and XenDesktop environment?

Question43: Why would a Citrix Engineer implement TFTP load balancing?

Question44: What are two benefits of creating a centralized vDisk Store? (Choose two.)

Question45: Scenario: The XenApp Administrator is using application streaming to provide users with access to their applications. A user reports that after launching a streamed application, the application hangs during launch.
Which step should the administrator take first to resolve the issue?

Question46: A Citrix Engineer needs to give users access to a new application which requires the installation of an additional application in order to function correctly.
Which layer should the engineer use while layering this new application for the users?

Question47: Scenario: A Citrix Engineer has implemented a multi-zone environment with the following characteristics:
-One Primary Zone in New York, one Satellite Zone in San Francisco and another in Singapore
-Microsoft Excel Application available in all zones
-Singapore zone configured as the App Home for Microsoft Excel
-San Francisco configured as the User Home for User1
User1 is currently located in the New York zone, and clicks the icon for Microsoft Excel in Receiver. User1 does NOT have any existing sessions in the environment.
Based on this scenario, a new session will be launched in ________. (Choose the correct option to complete the sentence).

Question48: Which update requires a Citrix Engineer to reverse image a vDisk?

Question49: A Citrix Engineer needs to prevent users from rapidly clicking an application icon and launching multiple sessions of the same published application.
Which three methods should the engineer use to configure the multi-launch timeout setting? (Choose three.)

Question50: After an administrator restarts a XenApp server, the XenApp Administrator notices that the IMA Service is NOT starting.
Which two components could be causing the issue? (Choose two.)

Question51: Scenario: The XenApp farm consists of two zones each located in a different datacenter. Last night, the network team conducted maintenance on the firewalls and this morning, the administrator discovers that load balancing is NOT working. The administrator asks the network team for a copy of the firewall rules. A few lines of the firewall rules are shown below.

What is most likely the cause for the load balancing issues?

Question52: Scenario: The XenApp farm consists of two zones, each located in a different datacenter. After some recent maintenance by the network team, the administrator discovers that the load balancing across the datacenters is NOT working.
The most likely cause for the load balancing issue is that the firewall has started blocking the __________.
(Complete the sentence with the correct option.)